Nozzle Bodies, Booms & 12v Pumps
We offer nozzle holders for use with both wet and dry boom set-ups. Seals are EPDM but viton is available on request. Clamps and spare diaphragms are also listed.
Wet Boom applications i.e. when the boom bar itself is the carrier of the water. The nozzle body clamps around the pipe and the spigot fills a pre-drilled hole in the pipe allowing the water to enter the nozzle body.
Dry Boom applications i.e.where the water supply connects through flexible hose and the nozzle bodies are clamped to a bar that is for support only. In this arrangement the body spacing can be more easily adjusted. Clamps will also be needed.