Wet Boom Holders & Booms
Boom Sections suitable for 1/2" holders below:
- 304 Stainless steel
- Pre-drilled 50cm spacing
- Tube ends threaded to 1/2" BSP
- Tube nominal O/D 21.3mm
- Max pressure 20 Bar
- Drilled hole 7mm
-
Wet Boom Nozzle Holder
Screw not includedWet Boom Nozzle Holder
8230005
Wet Boom Single Nozzle Holder w/o diaphragm check valve
For 20.7mm dia. boom
7mm inlet'
Cap not included
-
Wet Boom Nozzle Holder
Screw not includedWet Boom Nozzle Holder
8230009
Wet Boom Single Nozzle Holder w/o diaphragm check valve
For 26.2mm dia. boom
10mm inlet'
Cap not included
-
Swivel Holder with swivel & 3/8 threaded cap
Screw not included -
Single Nozzle Body 1/2"Boom Diameter
Single Nozzle Body with a Nominal Pipe O/D of 20.7mmSingle Nozzle Body 1/2"Boom Diameter
8234005
Single Nozzle Body with a Nominal Pipe O/D of 20.7mm
On diagram F=7mmThis nozzle needs a Bayonet cap (F1 on diagram)
Comes with a diaphragm check valve
Includes screw
Includes 'O' ring for spigot 'F'
Cap not included
-
Single Nozzle Body 3/4" Boom Diameter
Single Nozzle Body with a Nominal Pipe O/D of 26.2mmSingle Nozzle Body 3/4" Boom Diameter
8234009
Single Nozzle Body with a Nominal Pipe O/D of 26.2mm
On diagram F=10mm
This nozzle needs a Bayonet cap (F1 on diagram)
Comes with a diaphragm check valve
Includes screw
Includes 'O' ring for spigot 'F'
Cap not included
-
Triple Nozzle Body "Short Version" 3/4" Boom Diameter
Triple Nozzle Body "Short Version" with a 3/4" Boom DiameterTriple Nozzle Body "Short Version" 3/4" Boom Diameter
BA3A3/4
Triple Nozzle Body "Short Version" with a 3/4" Boom Diameter ('D' on diagram)
On diagram F=10mm
This nozzle needs a Bayonet cap (F1 on diagram)
Comes with a diaphragm check valve
Includes screw
Includes 'O' ring for spigot 'F'
Cap not included
-
Triple Nozzle Body "Short Version" 1/2" Boom Diameter
Triple Nozzle Body "Short Version" with a 1/2" Boom DiameterTriple Nozzle Body "Short Version" 1/2" Boom Diameter
BC3A1/2
Triple Nozzle Body "Short Version" with a 1/2" Boom Diameter ('D' on diagram)
On diagram F=7mm
This nozzle needs a Bayonet cap (F1 on diagram)
Comes with a diaphragm check valve
Includes screw
Includes 'O' ring for spigot 'F'
Cap not included
Our Promise
- Easy ordering 24/7
- Secure shopping
- Free delivery subject to £20 min. order value applies to tips only. There may be a charge for bulkier items.
