Description

Twinfan is an air-infusion nozzle which draws in air to provide large aerated droplets which can shatter upon target impact and disperse rather than bounce as with traditional large droplets, to provide improved coverage and penetration with reduced drift.

This design provides twin flat fan sprays for a double angle of attack to give improved penetration.

Features

• Twin fans provide good coverage and improved penetration spray deposition
• Provides a fine spray at higher volumes
• Three piece construction providing a removable pre-orifice to facilitate cleaning
• Polyacetal construction for chemical stability and excellent wear characteristics
• ISO colours

Application Rates
See the metric application rates of the Twinfan nozzle

see larger image

see larger image

General Information
For information about the selection, maintenance, filtration for nozzles and safety, please go to Nozzle Information

The PneuJet XL nozzle is an update of the original PneuJet which has proved very popular world wide for the past four years. The pre-orifice insert is now removable to facilitate cleaning and the air holes are shrouded to reduce potential blocking in dusty applications.

With the Pneu'Jet XLair infusion nozzle, the addition of a side hole draws in air to infuse the fluid stream which provides yet a further enhancement to the low drift characteristics - ideal for sensitive spraying applications.

Description

Pneu'Jet is an air-infusion nozzle which draws in air to provide large aerated droplets which can shatter upon target impact and disperse rather than bounce as with traditional large droplets, to provide improved coverage and penetration with reduced drift.

Features

• Two piece construction to facilitate cleaning
• All polyacetal construction for chemical stability and excellent wear characteristics
• Excellent coverage and penetration
• Colours and flow rates conform to ISO specification
• International size allows direct replacement with all conventional flat fan tips
• Fits all international caps and fittings
• Self alignment of spray when fitted in standard flat fan caps
• Suitable for both knapsack and boom sprayers

see larger image

Application Rates
For application rates of the Pneu'Jet XL nozzle in metric, imperial and USA, please go to PneuJet XL Application Rates - Imperial - Metric - USA

General Information
For information about the selection, maintenance, filtration for nozzles and safety, please go to Nozzle Information

This nozzle has been specially designed to provide droplets with an oblique angle of attack for slender vertical targets such as black grass etc

The nozzle inclines the 110° spray pattern 30º to the vertical. An arrow on the nozzle indicates the direction of spray

Features

• The Tilt 30 nozzle fits all international nozzle caps
• It is manufactured from high performance polyacetal with excellent wear characteristics and chemical stability
• We can design and develop variations on this particular nozzle or customise nozzles to suit specific applications. Please enquire

Applications

Because of its oblique angle of attack the Tilt 30 is suitable for slender vertical targets such as grasses. The Tilt 30 can be used for the application of insecticides, fungicides and herbicides.  For information on Metric application rates click here.